Appointment of Kamaz 4308: description, application
Kamaz 4308 - what kind of car is this? Absolutely all KAMAZ trucks are designed to perform such work as loading, transportation of materials. There are such "subspecies" as dump trucks, tow trucks, timber trucks, chassis, grain trucks, truck tractors and even garbage trucks! A car with a chassis can be used for any kind of work, such as installing a concrete mixer on them, attaching a trailer, and so on. This model belongs to flatbed vehicles, has a large body capacity, KAMAZ 4308 is quite suitable for transporting oversized cargo, it can also be used for transporting foodstuffs, consumer goods, etc.
The model is quite new, its release was launched in 2007 and continues at the present time. The car is designed for transportation on intercity routes, trips on city highways, looks modern and attractive, and is also equipped with a comfortable cab with soft seats. When buying KAMAZ directly from the manufacturer, you can choose the color of the model during the ordering process. The most common 4308 are white and yellow. Full model name in the manufacturer's catalog: KAMAZ - 4308-6011-C5(86). The engine runs on diesel fuel.
Modifications of the basic model
Currently, there are several modifications of KAMAZ - 4308-6011-C5 (86). They differ only in packaging. The technical parameters are the same for everyone.
Modifications are as follows:
- KAMAZ 4308-6063-69(G5) - Cummins ISB6.7E5 250 (E-5) engine, BOSCH injection pump, neutralization system. OG(AdBlue), check point ZF6S1000, awning, framework, vnutr. platform dimensions 6112x2470x730 mm, Russian standard tachograph with CIPF block;
- KAMAZ 4308-7063-69(G5) - Cummins ISB6.7E5 250 (E-5) engine, BOSCH injection pump, neutralization system. exhaust gas, gearbox ZF6S1000, awning, frame, internal dimensions of the platform 6112x2470x730 mm, rest-2, Russian standard tachograph with CIPF block;
- KAMAZ 4308-6083-69(G5) - Cummins ISB6.7E5 250 (E-5) engine, BOSCH injection pump, neutralization system. OG (AdBlue), gearbox ZF6S1000, rear air suspension, awning, frame, platform internal dimensions 6112x2470x730 mm, Russian standard tachograph with CIPF block.
Technical specifications
Specifications are as follows:
- onboard car with a body-platform;
- Wheel formula 4х2;
- road train, weight 19900 kg;
- the car has a weight of 11900 kg;
- lifting capacity 5880 kg;
- load on the front autumn 4350 kg;
- rear bogie load 7550 kg;
- truck dimensions: length 8435 mm, width 2550 mm, height 2670 mm;
- center distance 4100 mm or 4700 mm;
- tires size 245/70 R19,5;
- the volume of the cargo platform is 11 cubic meters;
- the platform has dimensions of 6112x2470x730 mm
- Euro 5 environmental standard engine, diesel, Cummins ISBe6,7 E5 model, engine power 250 hp, fuel injection pump CR/CP3S3/L110, fuel tank is designed for 210 liters;
- transmission: gearbox model ZF 6, clutch MZF 395;
- leaf spring suspension;
- interwheel blocking; maximum speed 90-100 kilometers per hour;
- fuel consumption: 14-16 liters per 100 km.
Driver's seat
The comfortable driver's cabin of KAMAZ 4308 is equipped with soft comfortable seats for the driver and passenger. Cabin height is 1505 mm, there is one berth. Cabin type: restyled. Cabin manufacturer Grammer (Germany).
The driver and passenger seats are comfortable, the cabin is equipped with soft seats, high-quality sound insulation, which is especially important when driving on the highway. The streamlining of the cab is increased, and due to the special external shape of the edges of the cab, much less dirt gets on this part of the car. In winter, the cabin perfectly retains heat.
Electrical: wiring diagram KAMAZ 4308
This is what the wiring diagram looks like:
Brake system and engine cooling system
Engine cooling system KAMAZ 4308:
Brake system KAMAZ 4308:
Major faults
Cause of failure | elimination method |
ENGINE | |
The engine will not start | |
| Lack of fuel in the fuel tank | Fill the fuel tank and bleed the fuel supply system |
| Air in the fuel supply system | Eliminate the leak and bleed the fuel supply system |
| Violation of adjustment of an angle of an advancing of injection of fuel | Adjust the fuel injection advance angle |
Increased oil consumption | |
| Prolonged engine idling | Unnecessarily do not work at idle speed of the engine |
| Oil leakage through connections in the turbocharger lubrication system | Tighten the connections and, if necessary, replace the gaskets and o-rings of the turbocharger |
| Deterioration of the valve interface - sleeve in the cylinder head, aging of the rubber cuff of the valve | Check and, in case of reaching the wear limit of the valve stem diameter - 0,05 mm and bushing - 0,2 mm, replace the worn parts |
| Clogged air cleaner or air intake hood | Service the air cleaner or clean the air intake hood mesh |
Where to buy spare parts for Kamaz 4308?
The main place for purchasing spare parts is either the website of an official dealer in your region (then you will receive spare parts either immediately or on order, depending on whether they are in stock). Also, if the car is not new, you can buy spare parts at the car market, from the same KAMAZ owners like you.
Error codes with decoding
See the most common error codes below:
| ADM3 SPN error code | ADM3 FMI error code | Error code ADM3 (K-line) | Error code MR2 (K-line) | Error Location | Error description |
| 51 | 0 | — | 12419 | Throttle actuator position | Above measuring range |
| 51 | 1 | — | 12420 | Throttle actuator position | Below measuring range |
| 51 | 2 | — | 12424 | Throttle actuator position | Measuring range improbable |
| 51 | 2 | — | 14217 | Throttle actuator position | Characteristics |
| 51 | 3 | — | 14205 | Throttle actuator position sensor | Short to high |
| 51 | 4 | — | 14206 | Throttle actuator position sensor | Short to low |
| 51 | 7 | — | 12431 | Throttle actuator position | Defective |
| 51 | 13 | — | 14218 | Throttle actuator position | Position outside |
Photo gallery Kamaz 4308
Several photos of Kamaz 4308:
The cost of a new and used car, analogs
The average cost of a used KAMAZ 4308 ranges from 7 to 18 thousand dollars. The price is formed depending on the modification, year of manufacture, configuration, general condition of the car and its mileage. The manufacturer sells new cars at a price of up to 4,6 million rubles (1,7 million UAH).
Video review of Kamaz 4308
Reviews about KAMAZ 4308
Andrei:
“From an economic point of view, the car is quite “difficult”, but it's worth it! Kamaz 4308 is the best that was created in the Russian Federation in the category of medium-sized vehicles, but in order for it to pay for itself, how much you need to earn on a car worth more than 3 million rubles so that it pays for itself, and then earns something, if you don’t work for a manufacturing or private firm that pays well. We definitely need shippers, stable and permanent, from whom money is received on time. That's when it makes sense to take this car. It's made very well!"
(1 ratings, average: 4,00)
Loading ...
