Mitraks mini tractors. Description, characteristics, service

Overview of mini tractors Mitraks

The Mitraks mini tractor is produced on the territory of the Russian Federation in St. Petersburg. The designers took into account the peculiarities of the operation of equipment on our lands, and made it as versatile, economical and strong as possible.

The model range of Mitraks minitractors today consists of only one model - the garden T10. It can be successfully applied both in the agricultural industry and in the construction industry.

The main advantages of this technique are small dimensions, which allow you to work in warehouses and bases, indoor greenhouses or small garden areas. At the same time, the range of work performed remains the same.

Garden mini tractors Mitraks T10 are equipped with reliable Chinese Lifan engines with a capacity of 15 horsepower. The engine starts with an electric starter.

• The gearbox has 4 positions: 3 forward and 1 reverse. The maximum speed of the tractor is 9,9 km/h.
• Garden minitractors Mitraks are equipped with universal wheels that are able to move on the ground and lawn.
• The overall dimensions of this machine are 1790×880×1020 mm.
• The Mitrax T10 mini tractor is equipped with a 6 mm thick steel frame, which allows you to put heavy attachments into operation.

Mitrax T10

A special control mechanism is installed in the garden minitractor, which allows you to deploy the device on a plot of land with a radius of 1 m.

Attachment overview

To increase the functionality of the Mitraks T10 minitractor, it is necessary to additionally use attachments. Below is a description of the main attachments for this model.

Milling cutters, cultivators, harrows, cultivators

To give uniformity to the upper layer of soil, cutters are used. This increases the fertility of the land.

After tillage with milling cutters, it is recommended to go through the harrow again. With the help of this attachment, the remaining large blocks of soil are broken, and a flat surface remains.

Cultivators are an improved version of cutters. Their design of knives has notches that not only turn over the layer of earth, but also break it. However, owners of garden mini tractors Mitraks T10 need to be careful, since cultivators are designed for processing virgin lands. If they work on soft soil, they can break it into fluff.

Cultivators are most often used to mark even beds for the purpose of further planting crops. This greatly facilitates their subsequent hilling and fertilization.

Plow and plowing

Milling cutters are not suitable for processing virgin lands, since they cannot sink into the ground. The manufacturer recommends using reversible plows for this purpose. Their ploughshare has a special feather shape. It allows you to first turn the soil several times, and only then throw it to the side.

When plowing, the main task is to make an even first trench, then one wheel is installed in this furrow, the plow is set to the appropriate immersion depth and the area continues to be processed.

Trailers and carts

Trailers or trolleys are used to transport goods with the Mitrax T10 mini garden tractor. The maximum load capacity of this machine reaches 500 kg.

Most often, owners choose dumping options. This facilitates the process of unloading hay or bulk cargo. It is enough just to lift the trolley in front and the load itself spills out.

Mowers and rakes

Rotary mowers are used to maintain garden or park areas in order. They cut grass thanks to rotating blades. The gripping height of the knives from the surface is only 7 cm.

Rotary mower

If it is necessary to clean large weeds or medium shrubs, it is better to use segment mowers. Their knives move in a horizontal plane alternately towards each other.

Mower segment

A rake is used for harvesting mowed grass and making hay for the winter. Their capture width can be from 80 cm to 1 m.

Potato planter and potato digger

Mitraks T10 minitractors are capable of automating the planting and harvesting of many crops. The most labor-intensive of them is the potato.

Thanks to the potato planter and potato digger, you can save a lot of health and time when carrying out these works.

Snow blower, blade-shovel

Mini tractor Mitraks can be used year-round. In winter, he is able to clean the snow cover.

Snow blowers pick up snow and use a rotor to throw it to the side at a distance of up to 10 m. The speed of cleaning the territory with this attachment is from 2 to 4 km / h.

A simpler hitch for cleaning the snow cover is a blade-shovel, it simply throws the snow to the side. Its working width is 1 m.

In the summer, a blade-shovel is used to level sand and gravel mixtures.

User's manual

Each owner of the Mitraks minitractor should study the instructions for its operation. It contains information regarding the description of the base of the device, technical characteristics, repair and maintenance work.

First start-up, run-in and conservation

The key to long-term use is the correct first start-up and running-in.

First of all, it is necessary to pour fuel and lubricant into all compartments!

Many new owners of a mini tractor forget about oil. Therefore, there is a lot of friction in the motor, and engine parts fail.

Before starting full operation, it is imperative to run the engine. During this period, the oil thoroughly lubricates all parts of the motor, and they securely fit into the corresponding grooves.

During the first 8 hours of operation of the garden mini tractor Mitraks T10, it is necessary to use it at minimum loads. Most often, during the break-in, they drive with an empty trailer or mill the soil at a depth of up to 5 cm.

Upon completion of the break-in, it is imperative to change the oil, since it collects a large amount of mechanical impurities.

If you do not plan to operate the Mitrax T10 minitractor for more than 2 months, then you need to put it in storage: drain the oil and diesel, disconnect the terminals from the spark plugs, clean it of dirt and put it in a place protected from sunlight and precipitation.

Service

To maintain the base of the Mitrax T10 mini tractor in working condition, it is necessary to carry out the technical work described in the instruction manual.

1. Engine oil should be changed every 200 hours of driving. For replacement, it is best to use the time-tested M-10G2k or M-10DM.
2. The transmission oil should be changed after 500 hours of operation. For this node, it is recommended to use Tap-15v or TAd-17i.
3. Clean and fresh diesel must be used. If sediment or impurities are present in it, then they can clog the fuel system and it will have to be disassembled and cleaned.

Major faults and repairs

Many malfunctions in the operation of the Mitrax T10 mini tractor can be solved independently. To do this, just read the instruction manual.

If there is increased vibration from the engine, it stalls during operation, or it starts with difficulty, then the following should be checked:

1. Tightness of bolted connections (they could loosen up);
2. The presence and quality of fuel and lubricant (due to this, there may be an interruption in the operation of the engine);
3. Inspect the engine starting system and the condition of the spark plugs (carbon deposits may form on them, the gap will change or the ignition terminals will move away);
4. Is the attachment connected correctly;
5. Belt drive status. Perhaps it is too stretched and the transfer of rotation is difficult;
6. Check if the air, fuel or oil filters are clogged.

Video review of work

Below is a video review of the Mitrax T10 garden mini tractor with snow removal equipment:

And here is a video review of the operation of a mini tractor in the field:

Video review of the operation of the Mitrax mini tractor as a mower:

Owner feedback

On thematic forums, you can find a large number of reviews from those people who have already encountered work on the Mitrax T10 garden mini tractor. Below are a few of them:

Vasiliy:

A beautiful mini tractor, but you can’t call it too reliable. It is rather intended for small gardens. It will not be possible to use it on a permanent basis in the field. For this, there is not enough power and the engine heats up quickly under intense loads. I use it to maintain cleanliness in the greenhouse, there are no complaints at work.

Nikolai:

In fact, this is not a mini tractor, but a walk-behind tractor in a beautiful package. Power of 15 horses is a confirmation of this. If you need a strong helper in the garden, then it is better to look at another model. I use it as a replacement for MTZ when a small amount of work needs to be done. It's much more economical.

Pros: Wide range of applications, economical, easy to operate

Cons: The design is frail, and you can’t call it a full-fledged mini tractor.