Mini tractor overview
Quite a long period of time has passed since the Xingtai mini tractors debuted on the world market. Now Chinese technology has significantly improved its quality and Xingtai XT 180 is one of the most popular models.
The engine of this minitractor feels confident in all climatic zones of Russia. The temperature range of application of these devices is from minus 30 °С to plus 40 °С. In addition, the Xingtai XT 180 minitractor is capable of operating attachments from third-party manufacturers.
Basic equipment
If you are the owner of the new Xingtai 180, then the machine itself, the user manual and the passport of the self-propelled machine are included in the package.
As an additional configuration, the possibility of installing a light cabin is presented, which allows you to operate the Xingtai XT 180 mini tractor in all weather conditions.
For work, you can immediately purchase additional attachments: a milling cutter, a plow, a mower, a blade-shovel, etc.
Technical specifications
| Engine | TY 290, vertical four-stroke water-cooled diesel |
| Power, hp / kW | 18/13,42 |
| Fuel consumption, g/kWh | 259 |
| Release | electric starter |
| Transmission | (3+1) *2 |
| Turn radius, m | 3,9 |
| Speed, km / h back and forth | 2.47 - 27,35 2.47 - 9,37 |
| Track mm | 960/990 |
| Wheel size, front/rear | 4,0 - 14 7,5 - 20 |
| Dimensions, mm length x width x height | X x 2530 1200 1750 |
| Weight, kg | 820 |
Feature of application
Basically, the Xingtai XT 180 minitractor is used for agricultural field work.
Before each departure, it is necessary to make sure that the steering and brake systems are in good condition, that fuel and oil are available, as well as that attachments are correctly connected.
Before starting the active use of the Xingtai 180 mini tractor, it is necessary to run it in so that all parts of the motor get used. To do this, for 8 hours, the minitractor must work at half power. After break-in, the oil must be changed.
At the end of the working season, the tractor must be mothballed: drain the fuel, clean the parts, lubricate them with oil and put the tractor in a dry place.
Устройство
The Xingtai XT 180 mini tractor is a light and maneuverable machine that can be used on small farms, inside large warehouses, greenhouses and livestock complexes. It has gained great popularity due to its following features:
- Onboard hydraulic system;
- Ability to connect attachments to a universal three-point hitch;
- Ability to tow a trailer with a maximum capacity of 2 tons.
A 180 × 4 drive is installed on the Xingtai XT 2 mini tractor.
User's manual
Each owner of the Xingtai XT 180 mini tractor should read the instruction manual. This is done in order to understand the algorithm for running the engine, maintenance, repair work and conservation of the machine.
If the paper version has not been preserved, then the rules for handling the device can be found in the public domain on the Internet.
Service
For stable operation of the Xingtai XT 180 mini tractor, it is necessary to change the engine oil every 250 hours of operation. It is recommended to fill in fresh lubricant with the classification M-10 or M-14.
The transmission oil should be changed every 500 hours. For replacement, it is recommended to use Tap-15v or TAd-17i.
Video review of work
Below is a video review of how potatoes are dug up using the Xingtai 180 mini tractor:
And here is a video review of the operation of the Xingtai XT 180 mini tractor with a three-circuit plow:
The following video review shows the process of transporting trees with the Xingtai XT 180 mini tractor:
Owner feedback
On thematic forums you can find the following reviews from the owners of Xingtai XT 180 mini tractors:
Igor:
The declared characteristics are true. But the car is budget, so it has its drawbacks. During operation in the second season, he replaced the generator. He obviously did not pull, and with him more than half of the electrical wiring. The transmission is not clearly fixed and sometimes two stages are switched on at once. The machine itself is budget, but the price of attachments kills. The entire hitch is the same as on European cars.
Sergei:
If properly maintained, this machine will work for a long time. But it needs to be brought to mind. Initially, replace the generator, then set up the correct operation of the hydraulic pump and additionally purchase lugs, since adhesion to the surface is not always enough.
Pros: Low cost, easy maintenance, economical.
Cons: Chinese assembly, many parts are dying of incense.
(2 ratings, average: 4,50)
Loading ...
